Bambu Lab Sparkle PLA Spool 1.75mm - 1kg - Onyx Black
Exc GST
Buy 1 + Units: $54.60 / EACH
Special Sparkling Look
Relatively High Impact Strength
Comes with Basic Reusable Spool
Diameter: 1.75mm +/- 0.03mm
AMS Compatible
0.2 mm Nozzle Not Compatible
Relatively High Impact Strength
Comes with Basic Reusable Spool
Diameter: 1.75mm +/- 0.03mm
AMS Compatible
0.2 mm Nozzle Not Compatible
Bambu PLA Sparkle
Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.
However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Drying PLA Sparkle is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed.
Accessory Compatibility
PLA Sparkle Hex Code Table
Recommended Printing Settings
Physical Properties
Mechanical Properties
Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.
However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Drying PLA Sparkle is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed.
Accessory Compatibility
- Build Plate: Cool Plate, High Temperature Plate or Textured PEI Plate
- Hotend: Hardened Steel Nozzle (0.4/0.6/0.8mm), Stainless Steel Nozzle (0.4mm)
- Glue: Bambu Liquid Glue / Glue Stick
- Not Recommended: Engineering Plate, Stainless Steel Nozzle
PLA Sparkle Hex Code Table
Slate Gray Sparkle | #8E9089 |
Crimson Red Sparkle | #792B36 |
Royal Purple Sparkle | #483ED8B |
Alpine Green Sparkle | #3F5443 |
Onyx Black Sparkle | #2D2B28 |
Recommended Printing Settings
Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
Nozzle Temperature | 190 - 230 °C |
Bed Temperature (with Glue) | 35 - 45 °C |
Printing Speed | < 250 mm/s |
Physical Properties
Density | 1.26 g/cm³ |
Vicar Softening Temperature | 57 °C |
Heat Deflection Temperature | 55 °C |
Melting Temperature | 156 °C |
Melt Index | 34.2 ± 3.3 g/10 min |
Mechanical Properties
Tensile Strength | 33 ± 3 MPa |
Breaking Elongation Rate | 11.7 ± 0.7 % |
Bending Modulus | 2310 ± 140 MPa |
Bending Strength | 63 ± 4 MPa |
Impact Strength | 66.5 ± 3.6 kJ/m² |
Supplier Part Number | 47912 |
---|---|
Pack Name | EACH |
Colour - Exact | Black |