Bambu Lab Sparkle PLA Spool 1.75mm - 1kg

Bambu PLA Sparkle
Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.

However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!

RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Drying PLA Sparkle is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed.

Accessory Compatibility

• Build Plate: Cool Plate, High Temperature Plate or Textured PEI Plate
• Hotend: Hardened Steel Nozzle (0.4/0.6/0.8mm), Stainless Steel Nozzle (0.4mm)
• Glue: Bambu Liquid Glue / Glue Stick
• Not Recommended: Engineering Plate, Stainless Steel Nozzle

PLA Sparkle Hex Code Table

Slate Gray Sparkle	#8E9089
Crimson Red Sparkle	#792B36
Royal Purple Sparkle	#483ED8B
Alpine Green Sparkle	#3F5443
Onyx Black Sparkle	#2D2B28

Recommended Printing Settings

Drying Settings (Blast Drying Oven)	55 °C, 8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 230 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 250 mm/s

Physical Properties

Density	1.26 g/cm³
Vicar Softening Temperature	57 °C
Heat Deflection Temperature	55 °C
Melting Temperature	156 °C
Melt Index	34.2 ± 3.3 g/10 min

Mechanical Properties

Tensile Strength	33 ± 3 MPa
Breaking Elongation Rate	11.7 ± 0.7 %
Bending Modulus	2310 ± 140 MPa
Bending Strength	63 ± 4 MPa
Impact Strength	66.5 ± 3.6 kJ/m²