Bambu Lab Metal PLA Spool 1.75mm - 1kg

Bambu PLA Metal is a metallic textured filament designed to enhance the aesthetic of your prints. It is designed to mimic the surface texture of metal, but it does not contain actual metal fillers.

With its advanced metallic shine, this filament offers a professional and high-end finish and a touch of sophistication to your prints while retaining almost the same comprehensive performance of regular PLA.

Drying PLA Metal is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed.

RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.

Accessory Compatibility

• Build Plate: Cool Plate, High Temperature Plate or Textured PEI Plate
• Not Recommended: Engineering Plate
• Hotend: All Size / Material
• Glue: Bambu Liquid Glue / Glue Stick

PLA Metal Hex Code Table

Iridium Gold Metallic	#B39B84
Copper Brown Metallic	#AA6443
Oxide Green Metallic	#1D7C6A
Cobalt Blue Metallic	#39699E
Iron Grey Metallic	#43403D

Recommended Printing Settings

Drying Settings (Blast Drying Oven)	55 °C, 8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 230 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 300 mm/s

Physical Properties

Density	1.25 g/cm³
Vicar Softening Temperature	62 °C
Heat Deflection Temperature	62 °C
Melting Temperature	160 °C
Melt Index	38.6 ± 3.7 g/10 min

Mechanical Properties

Tensile Strength	34 ± 4 MPa
Breaking Elongation Rate	14.7 ± 1.5 %
Bending Modulus	2290 ± 210 MPa
Bending Strength	66 ± 3 MPa
Impact Strength	58.9 ± 3.4 kJ/m²