Bambu Lab Metal PLA Spool 1.75mm - 1kg - Iridium Gold
Exc GST
Buy 1 + Units: $54.60 / EACH
Metal Surface Texture & Metallic Shine
No Metal particle infill
Relatively high impact strength
Comes with Basic Reusable Spool
Diameter: 1.75mm +/- 0.03mm
No Metal particle infill
Relatively high impact strength
Comes with Basic Reusable Spool
Diameter: 1.75mm +/- 0.03mm
Bambu PLA Metal is a metallic textured filament designed to enhance the aesthetic of your prints. It is designed to mimic the surface texture of metal, but it does not contain actual metal fillers.
With its advanced metallic shine, this filament offers a professional and high-end finish and a touch of sophistication to your prints while retaining almost the same comprehensive performance of regular PLA.
Drying PLA Metal is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Accessory Compatibility
PLA Metal Hex Code Table
Recommended Printing Settings
Physical Properties
Mechanical Properties
With its advanced metallic shine, this filament offers a professional and high-end finish and a touch of sophistication to your prints while retaining almost the same comprehensive performance of regular PLA.
Drying PLA Metal is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Accessory Compatibility
- Build Plate: Cool Plate, High Temperature Plate or Textured PEI Plate
- Not Recommended: Engineering Plate
- Hotend: All Size / Material
- Glue: Bambu Liquid Glue / Glue Stick
PLA Metal Hex Code Table
Iridium Gold Metallic | #B39B84 |
Copper Brown Metallic | #AA6443 |
Oxide Green Metallic | #1D7C6A |
Cobalt Blue Metallic | #39699E |
Iron Grey Metallic | #43403D |
Recommended Printing Settings
Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
Nozzle Temperature | 190 - 230 °C |
Bed Temperature (with Glue) | 35 - 45 °C |
Printing Speed | < 300 mm/s |
Physical Properties
Density | 1.25 g/cm³ |
Vicar Softening Temperature | 62 °C |
Heat Deflection Temperature | 62 °C |
Melting Temperature | 160 °C |
Melt Index | 38.6 ± 3.7 g/10 min |
Mechanical Properties
Tensile Strength | 34 ± 4 MPa |
Breaking Elongation Rate | 14.7 ± 1.5 % |
Bending Modulus | 2290 ± 210 MPa |
Bending Strength | 66 ± 3 MPa |
Impact Strength | 58.9 ± 3.4 kJ/m² |
Supplier Part Number | 47907 |
---|---|
Pack Name | EACH |
Weight - Metric | 1kg |
Type | PLA |
Colour - Exact | Gold |