Bambu Lab ABS Spool 1.75mm - 1kg - Mint
Exc GST
Buy 1 + Units: $53.70 / EACH
- Tough and Durable
- Good Heat & Freezing Resistance
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
- AMS Compatible
- Enclosure Printers Required
- Good Heat & Freezing Resistance
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
- AMS Compatible
- Enclosure Printers Required
More Eco-Friendly, 20% Less Plastic Waste
Use the reusable spool or print your own to reduce plastic waste
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Accessory Compatibility
- Build Plate: Engineering Plate, High Temperature Plate or Textured PEI Plate
- Hotend: All Size / Material
- Glue: Bambu Liquid Glue / Glue Stick
- Not Recommended: Cool Build Plate
ABS Hex Code Table
Colour | Hex Code |
White | #FFFFFF |
Silver | #87909A |
Red | #D32941 |
Orange | #FF6A13 |
Yellow | #FCE900 |
Mint | #7AE1BF |
Bambu Green | #00AE42 |
Blue | #0A2CA5 |
Purple | #AF1685 |
Black | #000000 |
Drying Settings (Blast Drying Oven) | 80 °C,8 h |
Printing and Keeping Container's Humidity | < 20% RH (Sealed,with Desiccant) |
Nozzle Temperature | 240 - 270 °C |
Bed Temperature (with Glue) | 80 - 100 °C |
Printing Speed | < 300 mm/s |
Physical Properties
Density | 1.05 g/cm³ |
Vicar Softening Temperature | 94 °C |
Heat Deflection Temperature | 87 °C |
Melting Temperature | 200 °C |
Melt Index | 34.2 ± 3.8 g/10 min |
Mechanical Properties
Tensile Strength | 33 ± 3 MPa |
Breaking Elongation Rate | 10.5 ± 1.0 % |
Bending Modulus | 1880 ± 110 MPa |
Bending Strength | 62 ± 4 MPa |
Impact Strength | 39 ± 3.6 kJ/m² |
Supplier Part Number | 48452 |
---|---|
Pack Name | EACH |
Weight - Metric | 1kg |
Type | ABS |
Colour - Exact | Light Green |