Bambu Lab Tough PLA Spool 1.75mm - 1kg
Only %1 left
Easy to Print
Enhanced Toughness and Strength
Good Layer Adhesion
Comes with Basic Reusable Spool
Diameter: 1.75mm +/- 0.03mm
AMS Compatible
Enhanced Toughness and Strength
Good Layer Adhesion
Comes with Basic Reusable Spool
Diameter: 1.75mm +/- 0.03mm
AMS Compatible
Bambu PLA Tough
Bambu PLA Tough is a premium quality 3D printing filament that combines the benefits of regular PLA with added durability and strength. With 20% greater toughness and strength compared to regular PLA, it is the ideal choice for applications that require enhanced mechanical properties. It also offers a more glossy and smooth finish, which can be used for creating visually appealing objects and models.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Drying PLA Tough is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed.
Accessory Compatibility
PLA Tough Hex Code Table
Recommended Printing Settings
Physical Properties
Mechanical Properties
Bambu PLA Tough is a premium quality 3D printing filament that combines the benefits of regular PLA with added durability and strength. With 20% greater toughness and strength compared to regular PLA, it is the ideal choice for applications that require enhanced mechanical properties. It also offers a more glossy and smooth finish, which can be used for creating visually appealing objects and models.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Drying PLA Tough is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed.
Accessory Compatibility
- Build Plate: Cool Plate, High Temperature Plate or Textured PEI Plate
- Not Recommended: Engineering Plate
- Hotend: All Size / Material
- Glue: Bambu Liquid Glue / Glue Stick
PLA Tough Hex Code Table
White | #F9F7F4 |
Silver | #898D8D |
Gray | #515A6C |
Black | #25282A |
Lavender Blue | #6667AB |
Vermilion Red | #DD3C22 |
Orange | #FF7F41 |
Yellow | #FEDB00 |
Light Blue | #0085AD |
Pine Green | #00482B |
Recommended Printing Settings
Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
Nozzle Temperature | 190 - 230 °C |
Bed Temperature (with Glue) | 35 - 45 °C |
Printing Speed | < 300 mm/s |
Physical Properties
Density | 1.26 g/cm³ |
Vicar Softening Temperature | 58 °C |
Heat Deflection Temperature | 55 °C |
Melting Temperature | 158 °C |
Melt Index | 44.2 ± 3.5 g/10 min |
Mechanical Properties
Tensile Strength | 36 ± 3 MPa |
Breaking Elongation Rate | 8.2 ± 0.4 % |
Bending Modulus | 2930 ± 150 MPa |
Bending Strength | 87 ± 4 MPa |
Impact Strength | 31.2 ± 2.6 kJ/m² |