Bambu Lab PLA Spool 1.75mm - 0.5kg - Support Black

1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.

Cautions for Use

• ONLY used for support interface
• Not used for printing models alone
• Dry out before use
• AMS compatible

RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Support for PLA needs proper drying before printing: recommended drying temperature is 55 ℃ for 8 hours in a blast drying oven. Learn more about filament drying.

Attribute Comparison

	Support for PLA	Support for PA/PET
Color	White	Green
Nozzle Temperature	210-230°C	270-290°C
Bed Temperature	35-45°C	80-100°C
Print Speed	<200mm/s	<100mm/s
Water Soluble	No	No
Recommended for	PLA	PAHT-CF,PA6-CF,PA-CF, PA-GF, PET-CF
Cannot be used with	PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA	PLA, ABS, PETG, TPU, ASA

Recommended Printing Settings

Drying Settings (Blast Drying Oven)	55 °C, 8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	220 - 230 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 200 mm/s

Physical Properties

Density	1.22 g/cm³
Melting Temperature	190 °C
Melt Index	6.4 ± 1.2 g/10 min