Bambu Lab PA/PET Spool 1.75mm - 0.5kg - Support Green

Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 90 ℃ for 10 hours on heat bed.

1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.

RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Product Features

• Easy removal by hand
• Perfect support interface
• Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
• Comes with High Temperature Reusable Spool
• Diameter: 1.75mm +/- 0.03mm

Cautions for Use

• ONLY used for support interface
• Not used for printing models alone
• Dry out before use
• AMS compatible

Recommended Printing Settings

Drying Settings (Blast Drying Oven)	80 °C，12h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	260 - 290 °C
Bed Temperature (with Glue)	80 - 110 °C
Printing Speed	< 100 mm/s

Physical Properties

Density	1.17 g/cm³
Melting Temperature	255 °C
Melt Index	29.2 ± 2.1 g/10 min

Attribute Comparison

	Support for PLA	Support for PA/PET
Color	White	Green
Nozzle Temperature	210-230°C	270-290°C
Bed Temperature	35-45°C	80-100°C
Print Speed	<200mm/s	<100mm/s
Water Soluble	No	No
Recommended for	PLA	PAHT-CF,PA6-CF,PA-CF, PA-GF, PET-CF
Cannot be used with	PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA	PLA, ABS, PETG, TPU, ASA