Bambu Lab Matte PLA Refill 1.75mm - 1kg

RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.

Drying PLA Matte is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed.

Accessory Compatibility

• Build Plate: Cool Plate, High Temperature Plate or Textured PEI Plate
• Not Recommended: Engineering Plate
• Hotend: All Size/Material
• Glue: Bambu Liquid Glue / Glue Stick

PLA Matte Hex Code Table

Ivory White	#FFFFFF
Latte Brown	#D3B7A7
Ash Gray	#9B9EA0
Lilac Purple	#AE96D4
Sakura Pink	#E8AFCF
Mandarin Orange	#F99963
Lemon Yellow	#F7D959
Scarlet Red	#DE4343
Dark Red	#BB3D43
Dark Brown	#7D6556
Dark Green	#68724D
Grass Green	#61C680
Ice Blue	#A3D8E1
Marine Blue	#0078BF
Dark Blue	#042F56
Charcoal	#000000

Recommended Printing Settings

Drying Settings (Blast Drying Oven)	55 °C，8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 230 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 300 mm/s

Physical Properties

Density	1.31 g/cm³
Vicar Softening Temperature	63 °C
Heat Deflection Temperature	58 °C
Melting Temperature	163 °C
Melt Index	39.4 ± 3.2 g/10 min

Mechanical Properties

Tensile Strength	30 ± 5 MPa
Breaking Elongation Rate	14.8 ± 4.2 %
Bending Modulus	2360 ± 250 MPa
Bending Strength	53 ± 6 MPa
Impact Strength	19.2 ± 3.7 kJ/m²